Kramer VP-701XL

38
+H+V
-H+V
+H-V
-H-V
8.8 Items Associated with the System group
The final Sub Menu is for adjustments of System parameters. The “System” in this
case means the unit’s functions that are generally unrelated to individual inputs,
outputs or any of the various production features.
This screen is an informational screen. Should you require technical assistance
with your unit, the technical support personnel may request that you read the
contents of this screen to them during the support call.
The first section, “SW”, is the version of the software that is installed on your unit.
You can update software via the User Support web site (procedure to be described
later in this manual) and the updates are currently free of charge. “PT” refers to
Product Type and “BT” means Board Type. Both of these are hardware
designators and cannot be changed by the user however both designators are
important to support personnel.
This is an information page showing when the currently installed software was
released. The information is useful to the user as he or she compares the date to
the website information describing the current software release.
Normally, the user will examine the added features of each new
software release and determine if an update is worth doing in
their particular operation. The greater period of time between the
current date, and the date shown for the currently installed
software, the greater the likelihood that there are useful changes and
improvements present in the new release.
The TAC number is a unique identifier for the unit and is for future use.
System
SW: 16, PT: 12, BT: 13
System
SW date: 2006-7-11
System
TAC# 27-56-12-93-28-33