Kramer VP-701XL

46
Adjust outputs
Lock source (connector) 149 0x10 = RGB1, 0x11 = RGB2, 0x12 = RGB3
0x30 = CV1, 0x31 = CV2, 0x32 = CV3
0x40 = YC1, 0x41 = YC2, 0x42 = YC3
0x50 = SDI1, 0x51 = SDI2
0xD0 = OUT1, 0xD1 = OUT2
0xF0 = TC1, 0xF1 = TC2
Lock method 10A 0..2 = Off, Genlock, Lock & Mix
Output resolution 083 1..1000
Output image type
analogue
0E2 0 = RGBHV
2 = RGsB
3 = YUV
4 = tlYUV
7 = tlRGB
Output image type digital 16C 0 = RGBHV
3 = YUV
9 = Not available
Background Y 13B 16..235
Background U 13C 16..240
Background V 13D 16..240
CCIR Output Standard 101 0 = NTSC/PAL, 1 = PAL-M/PAL-N, 2 =
SECAM
Output CV/YC IRE 133 -7.5..12.5
Output CV/YC Hue
(degrees)
139 -22..22
Output SC/H Phase 085 -180..180
Output Luma Bandwidth 134 0,1,2 = Low, Medium, High
Output Chroma
Bandwidth
135 0,1,2 = Low, Medium, High
Output Chroma delay 137 -4..3
PAL WSS 130 0 = Off
1 = 4:3 Full format
2 = 14:9 Letterbox centre
3 = 14:9 Letterbox top
4 = 16:9 Letterbox centre
5 = 16:9 Letterbox top
6 = >16:9 Letterbox centre
7 = 14:9 Full format
8 = 16:9 Full format
Take 11E 0->1 = Perform a Preview -> Program
transition
Adjust Windows
Program source / Window
source (connector)
082 0x10 = RGB1, 0x11 = RGB2, 0x12 = RGB3
0x30 = CV1, 0x31 = CV2, 0x32 = CV3
0x40 = YC1, 0x41 = YC2, 0x42 = YC3