Krautkramer DynaPOCKET Issue 03, 04/2005 0-5
Content
7 The rebound hardness testing
method .............................................. 7 -1
7.1 The hardness testing method ................ 7 -2
7.2 Conversion of hardness values .............. 7 -3
Material groups ......................................... 7 -4
Application ranges of the conversion tables . 7 -5
7.3 The treatment of test material ................ 7 -6
Surface quality .......................................... 7 -6
Curved surfaces........................................ 7 -6
Measurements on small objects ............... 7 -6
Minimum wall thicknesses ........................ 7 -6
7.4 Information about the
statistical evaluation ............................... 7 -8
8 Annex ................................................ 8 -1
8.1 EU declaration of conformity ................. 8 -2
8.2 Manufacturer/Service addresses ............ 8 -2
9 Index .................................................. 9 -1
To Next Page
Loading...
