8. PC Service Program
8.1 Installation
Hardware requirements:
- PC with Windows 2000 / XP / W7 / W10
- USB interface
- Printer
Step-by-Step instructions
1. Download and decompress setup file Kroeber_x_x_x_x.zip.
(x_x_x_x represents the actual version)
2. Install the driver for the USB interface by starting setup.exe in the destination folder.
3. Connect the Kröber O2 to the USB interface of your PC and on the concentrator.
4. Windows detects the new hardware and automatically installs the necessary drivers.
5. Install the Kröber O2 service software by starting setup.exe in the destination folder.
6. Start Kröber O2 after successful installation in the start menu.
7. Enter the registration code: 1360103134
8. The installation processed is finished. The service software establishes a connection
to the Kröber O2.
To Next Page
Loading...
