KROHNE OPTIMASS 7000 - Page 33

TECHNICAL DATA 6
33
OPTIMASS 7000
www.krohne.com10/2015 - 4001016303 - MA OPTIMASS 7000 R03 en
Accuracy
±2 kg/m
3
/ ±0.13 lbs/ft
3
On site calibration
±0.5 kg/m
3
/ ±0.033 lbs/ft
3
Temperature
TemperatureTemperature
Temperature
Accuracy ±1°C / ±1.8°F
Operating conditions
Maximum flow rates
Maximum flow ratesMaximum flow rates
Maximum flow rates
06 1230 kg/h / 45 lbs/min
10 3500 kg/h / 129 lbs/min
15 14600 kg/h / 536lbs/min
25 44800 kg/h / 1646 lbs/min
40 120000 kg/h / 4409 lbs/min
50 234000 kg/h / 8598 lbs/min
80 560000 kg/h / 20567 lbs/min
Ambient temperature
Ambient temperatureAmbient temperature
Ambient temperature
Compact version with Aluminium
converter
-40...+60°C / -40…+140°F
Extended temperature range +65°C / +149°F for some I/O options. For more
information contact manufacturer
Compact version with Stainless Steel
converter
-40...+55°C / -40…+130°F
Remote versions -40...+65°C / -40…+149°F
Process temperature
Process temperatureProcess temperature
Process temperature
Titanium -40…+150°C / -40…+302°F
Stainless Steel 0…+100°C / 32…+212°F
Extended temperature range 0…+130°C / 32…+266°F on Stainless Steel,
sizes 25…80, hygienic connections only
Hastelloy
®
0…+100°C / 32…+212°F
Tantalum 0…+100°C / 32…+212°F
Nominal pressure at 20
Nominal pressure at 20Nominal pressure at 20
Nominal pressure at 20°C / 68
C / 68C / 68
C / 68°F
FF
F
Measuring tube
Measuring tubeMeasuring tube
Measuring tube
Titanium -1…100 barg / -14.5…1450 psig
Stainless Steel / Hastelloy
®
/ Tantalum
-1…50 barg / -14.5…725 psig
Outer cylinder
Outer cylinderOuter cylinder
Outer cylinder
Non PED / CRN approved Typical burst pressure > 100 barg / 1450 psig at 20°C
PED approved secondary containment
PED approved secondary containmentPED approved secondary containment
PED approved secondary containment
Titanium (Stainless Steel 304 or 316
outer cylinder)
-1…63 barg / -14.5…910 psig
Titanium (Stainless Steel 316 outer
cylinder)
-1…100 barg / -14.5…1450 psig
Stainless Steel / Hastelloy
®
(Stainless
Steel 304 or 316 outer cylinder)
-1…63 barg / -14.5…910 psig
Tantalum (316 outer cylinder) -1…50 barg / -14.5…725 psig
CRN approved secondary containment
CRN approved secondary containmentCRN approved secondary containment
CRN approved secondary containment
Titanium (Stainless Steel 304 or 316
outer cylinder)
-1…63 barg / -14.5…910 psig
Stainless Steel / Hastelloy
®
(Stainless
Steel 304 or 316 outer cylinder)
-1…63 barg / -14.5…910 psig
MA_OPTIMASS_7000_en_151026_4001016303_R03.book Page 33 Monday, October 26, 2015 4:44 PM