KROHNE OPTIMASS 7000 - Page 34

6 TECHNICAL DATA
34
OPTIMASS 7000
www.krohne.com 10/2015 - 4001016303 - MA OPTIMASS 7000 R03 en
Fluid properties
Fluid propertiesFluid properties
Fluid properties
Permissible physical condition Liquids, gases, slurries
Permissible gas content (volume) Contact manufacturer for information
Permissible solid content (volume) Contact manufacturer for information
Other operating conditions
Other operating conditionsOther operating conditions
Other operating conditions
Protection category (acc. to EN 60529) IP 67, NEMA 4X
Installation conditions
Inlet runs None required
Outlet runs None required
Materials
Titanium meter
Titanium meterTitanium meter
Titanium meter
Measuring tube / raised faces Titanium grade 9 / grade 2
Flanges Stainless Steel 316 / 316L (1.4401 / 1.4404) dual certified
Outer cylinder Stainless Steel 304 / 304L (1.4301 / 1.4307) dual certified
Optional Stainless Steel 316 / 316L (1.4401 / 1.4404) dual certified
Stainless Steel meter
Stainless Steel meterStainless Steel meter
Stainless Steel meter
Measuring tube / raised faces Stainless Steel UNS S31803 (1.4462)
Flanges Stainless Steel 316 / 316L (1.4401 / 1.4404) dual certified
Outer cylinder Stainless Steel 304 / 304L (1.4301 / 1.4307) dual certified
Optional Stainless Steel 316 / 316L (1.4401 / 1.4404) dual certified
Hastelloy
HastelloyHastelloy
Hastelloy® meter
meter meter
meter
Measuring tube / raised faces
Hastelloy
®
C-22
Flanges Stainless Steel 316 / 316L (1.4401 / 1.4404) dual certified
Outer cyclinder Stainless Steel 304 / 304L (1.4301 / 1.4307) dual certified
Optional Stainless Steel 316 / 316L (1.4401 / 1.4404) dual certified
Tantalum meter
Tantalum meterTantalum meter
Tantalum meter
Measuring tube / raised faces UNS RO5255 / RO5200
Flanges Stainless Steel 316 / 316L (1.4401 / 1.4404) dual certified
Outer cylinder Stainless Steel 316 / 316L (1.4401 / 1.4404) dual certified
Heating jacket version
Heating jacket versionHeating jacket version
Heating jacket version
Heating jacket Stainless Steel 316L (1.4404)
The outer cylinder is in contact with the heating medium
All versions
All versionsAll versions
All versions
Sensor electronics housing Stainless Steel 316L (1.4409)
Junction box (remote version) Die cast Aluminium (polyurethane coating)
Optional Stainless Steel 316L (1.4401)
Process connections
Flange
FlangeFlange
Flange
DIN DN10…100 / PN40…100
ASME ½…4" / ASME 150…600
JIS 10…100A / 10...20K
MA_OPTIMASS_7000_en_151026_4001016303_R03.book Page 34 Monday, October 26, 2015 4:44 PM