Krups BeerTender - Page 22

21
ENGLISH
There is no keg
inside the
BeerTender
appliance (the
4 levels of the
volume indicator
are blinking).
Install a keg inside
the BeerTender
appliance.
The BeerTender
appliance tap
handle is not
correctly
installed/positioned.
Install/position the
tap correctly.
The
BeerTender
produces too
much foam
when
dispensing beer
(see also
chapter 7:
Dispensing
beer).
The BeerTender
Keg has not
reached the right
dispensing
temperature.
Allow the
BeerTender Keg to
cool to the right
temperature. You
can rely on the
temperature
indicator on the
control display of
your BeerTender
appliance.
The BeerTender
Keg has been
shaken.
Wait 4 hours before
dispensing beer.
The tap handle is
being moved too
slowly.
Firmly and quickly
pull the handle
down and forward
as far as it will go.
Beer flows out
too slowly.
The tap handle is
not open all the
way.
Open the tap
completely.
The
BeerTender
appliance is
dispensing
warm beer
.
The BeerTender
Keg has not been
chilled for long
enough in the
refrigerator and is
thus not at the
right serving
temperature.
Allow the
BeerTender Keg to
cool in the
refrigerator for
about -12 hours.
1-B95 oneway Amsterdam_UK.qxd:1-B95 oneway Amsterdam_UK.qxd 6/08/08 14:53 Page 21