Krups BeerTender - Page 23

22
ENGLISH
The beer has been
tapped before it
has attained the
right drinking
temperature (see
temperature
indicator).
Allow the
BeerTender Keg to
cool long enough
in the appliance.
The
temperature
indicator on the
control display
never reaches
a ready-to-drink
level.
The BeerTender
appliance is
exposed at a too
hot temperature or
to direct sunlight
(see also chapter 5
– “Cooling the keg”
and “Installing the
BeerTender”).
Use the appliance
indoor and move it
in a room where
ambient
temperature does
not exceed 30°C.
The control
display shows
an increasing
temperature.
A warm keg was
installed in a cold
appliance.
Allow the
BeerTender system
to compensate
effect of the
temperature
change. Displayed
temperature should
start decreasing
after 1 hour
maximum.
If you have any problems or queries please contact our
Customer Relations Team first for expert help and advice.
(see details per country at the end of this manual)
1-B95 oneway Amsterdam_UK.qxd:1-B95 oneway Amsterdam_UK.qxd 6/08/08 14:53 Page 22