Krups Precision range XP80 - Technical Specifications; Setting up the Machine

1
ENGLISH
41
42
43 44
45 46 47
48
50
51
52
53 54 55 56
5857
49
DESCRIPTION
A Overview
A1 Water Tank
A2 Bean Hopper
A3 Coee Grinder Outlet
A4 Brewing Head
A5 Steam Wand
A6 Hot Water Outlet
A7 Drip Tray Grid
A8 Drip Tray
A9 Cup Warmer
A10 Accessories storage
B Interface
B1 Power button
B2 Grinding level selector
B3 Ground coee quantity dial
B4 1 or 2 cups button
B5 Start/Stop grind button
B6 Recipes and cleaning dial:
Espresso / Lungo / Americano /
Hot Water / Steam / Calc
B7 Pre-infusion time button
B8 Temperature button
B9 Start/Stop brew button
B10 Manometer
B11 Lack of water indicator
B12 “Calc” Descaling indicator
C Accessories
C1 Portalter
C2 Tamper
C3 Small cup support
C4 Water lter insertion support accessory
C5 Water lter
C6 Milk pitcher
C7 2-cup single wall lter
C8 1-cup single wall lter
C9 2-cup dual wall lter
C10 1-cup dual wall lter
C11 Cleaning pin
C12 Cleaning brush
C13 Blind sieve
C14 Dosing funnel
C15 Tamping & knocking box station
C16 Cleaning towel
TECHNICAL SPECIFICATIONS
 Pump: 15 bar
 Power: 1380-1550 W
 Voltage: 220-240 V
 Safety devices against overheating
 Dimensions: 428 x 312 x 414 mm
IMPORTANT!
This appliance is designed to operate at 220-240 V alternating current only.
This appliance is designed for DOMESTIC USE ONLY
SETTING UP THE MACHINE
IMPORTANT! Do not place heating elements on the appliance.
IMPORTANT! The safety instructions are part of the appliance.
Please read them carefully before using your new appliance.