Krups Precision range XP80 - Troubleshooting

1110
ENGLISH
EXPLANATION OF INDICATION LIGHTS
GUARANTEE
This appliance carries a manufacturer’s 2 year guarantee. This appliance has been designed
for domestic use only. Any commercial use, inappropriate use or failure to comply with the
instructions, the manufacturer accepts no responsibility and the guarantee will not apply.
For any after-sales problem or for spare parts, please contact an approved service centre.
No repairs on the coee machine will be covered by the guarantee in case of:
– No descaling carried out.
– Limescale build-up.
– Accessories cleaned in a dishwasher. (Dishwashing safe only for drip tray grill, steam nozzle
tube, lter cups.)
LIGHTS
EXPLANATION OF
INDICATOR LIGHTS
OPERATION
All indicators ash once Turning the machine on No action
The Start/Stop Grind
indicator is solid in orange.
The bean box is not in place Install the bean box in place
The Start/Stop Grind
indicator ashes in white
slowly. Other lights remain
unchanged
Grinding process is on going
The lack of water light is
ashing
Water needs to be added Add water in the water tank
The water tank is not in place Install the water tank
1 CUPS light is on One cup is currently chosen To change, press the
button(18)
2 CUPS light is on Two cups is currently chosen To change, press the
button(18)
Pre-infusion 5s (or 2s or 8s)
light is on
5 seconds (or 2 seconds,
8seconds) is currently chosen
To change, press the
button(26)
TEMPERATURE 2 lignes are lit Middle temperature is
currently chosen.
1 line = lower temperature
2 lines = midle temperature
3 lines = higher temperature
To change, press the
button(27)
TEMPERATURE light is o Either HOT WATER function,
STEAM function or CALC is
chosen.
To, choose select coee
recipes with the recipes and
cleaning dial
1 CUPS (or 2 CUPS) light is o Either HOT WATER function,
STEAM function or CALC is
chosen.
To, choose select coee
recipes with the recipes and
cleaning dial
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
The machine does not grind
the coee.
The bean box is not in place. Install the bean box in
place(12).
Lack of beans or not enough
beans in the bean box.
Add the beans (14).
The bean or ground coe is
stuck in the Grinder.
Remove the beans and clean
the grinder (43).
Changing to a dierent type
of bean.
- You are recommended to
pour only the amount of
beans to be used into the
beans box
- To empty the box, remove
remaining beans, grind all
the remaining beans in the
container until completely
empty.
- Add new type of coee
beans.
- Re-adjust coee ground
quantity if necessary (15)
After grinding, the amount of
coee in the lter does not
give the desired dose.
The quantity of ground coee
needs adjusting.
-
Adjust the quantity of coee
with the dial (more or less (15)).
- Adjust the grinding ness
with the bean box settings
(ner or coaser) (13).
- If you are using the 1 cup
lter, make sure the 1 cup
light is on (18).
LIGHTS
EXPLANATION OF
INDICATOR LIGHTS
OPERATION
Pre-infusion time light is o Either HOT WATER function,
STEAM function or CALC is
chosen.
To, choose select coee
recipes with the recipes and
cleaning dial
The Start/Stop Brew indicator
ashes in white slowly
Machine is pre-heating for
the coee brewing, the steam
or the hot water function
Please wait until the indicator
turns in solid white
Machine is cooling down after
the usage of steam or hot
water function
CALC light is ON in red Machine requires a descaling Start descaling process