Firmware update page 17
4. Click on Software Updates.
5. Under BP50, download the ZIP archive with the filename that indicates the
highest firmware number.
6. Click on Log-Out.
SPAC S PA C S PAC SPAC
Uploading the firmware
1. Extract the downloaded archive into a local folder.
Do not use a network folder.
All files of the extracted archive must be in the same folder.
SPAC S PA C S PAC SPAC
2. Disconnect the BP50 from the computer.
3. Press and hold the
key. Connect the BP50 to a USB port on the computer.
The Status indicator on the BP50 will illuminate red. The BP50 will be in the
firmware upload mode.
SPAC S PA C S PAC S PAC
To Next Page
Loading...
