Need help?Do you have a question about the KS LEV and is the answer not in the manual?
General| Type | Dropper Seatpost |
|---|---|
| Material | Aluminum |
| Actuation | Cable |
| Travel | 100mm, 125mm, 150mm |
| Diameter | 30.9mm, 31.6mm |
| Activation | Lever |
Regular maintenance by a qualified technician is mandatory; disassembly voids warranty and poses injury risk.
Ensure seat post is inserted to cover the minimum insertion line to prevent damage and loss of control.
Tighten seat collar to a maximum of 7 N-m; over-torquing inhibits function and voids warranty.
Lower saddle by weighting it and holding lever; raise by pulling lever while unweighted.
Adjust return speed using a shock pump on the air valve (150-250psi); LEV DX and 272 are not adjustable.
Check seat post security, bolt torque, wear, leaks, and proper function for safe control of the bicycle.
To Next Page
