14
ADJUSTING THE RETURN SPEED
NOTE: All LEV models come with suitable pressure for the return
spring. Test the return speed of LEV before you make adjustments.
Using a flathead screwdriver, remove the air valve cap from the
top end of the stanchion tube.
Attach a compatible shock pump and adjust to your desired
pressure. KS recommends our AIR-8 High Pressure pump for best
results.
NOTE: Recommended operating pressures is 150-250psi. Do not
exceed 250psi. LEV DX and LEV 272 are not adjustable.
Air Valve Cap
Shock Pump
To Next Page
Loading...
