1 Supplementary Operating Manual
11 of 48
AmaControl
2301.83/04-EN
Start End Description Data type
8223 8223 Mean value of frequency (all 3 phases)
0 = not assigned
1 = frequency 0 Hz
2 = incorrect phase sequence
3…65535 motor supply frequency in Hz
u 16bit
8228 8228 Number of hours of the current day (internal time)
0-23 h
u 8bit
8230 8230 Total number of starts of the current day (internal time)
0...255
u 8bit
8232 8232 Total number of starts of the previous day (current day - 1 day; internal
time)
0…255
u 8bit
8233 8233 Total number of starts two days ago (current day - 2 days; internal time)
0...255
u 8bit
8234 8234 Total number of starts three days ago (current day - 3 days; internal time)
0...255
u 8bit
8235 8235 Total number of starts four days ago (current day - 4 days; internal time)
0...255
u 8bit
8236 8236 Total number of starts five days ago (current day - 5 days; internal time)
0...255
u 8bit
8237 8237 Total number of starts six days ago (current day - 6 days; internal time)
0...255
u 8bit
8240 8240 Switching cycles of the current hour (internal time)
0...255
u 8bit
8241 8241 Maximum of the switching cycles per hour of the current day (internal
time)
0...255
u 8bit
8242 8242 Maximum of the switching cycles per hour of the previous day (current
day - 1 day; internal time)
0...255
u 8bit
8243 8243 Maximum of the switching cycles per hour of two days ago (current day -
2 days; internal time)
0...255
u 8bit
8244 8244 Maximum of the switching cycles per hour of three days ago (current
day- 3 days; internal time)
0...255
u 8bit
8245 8245 Maximum of the switching cycles per hour of four days ago (current day -
4 days; internal time)
0...255
u 8bit
8246 8246 Maximum of the switching cycles per hour of five days ago (current day -
5 days; internal time)
0...255
u 8bit
8247 8247 Maximum of the switching cycles per hour of six days ago (current day - 6
days; internal time)
0...255
u 8bit
8248 8248 Module condition, motor temperature monitoring
High byte: error number
Low byte: module condition, bit-coded
Bit 0 = active
Bit 1 = warning
Bit 2 = fault
Bit 3 = re-start delay
Bit 4 = interlocked
u 16bit
To Next Page
Loading...