Need help?Do you have a question about the KSB Leakage Sensor and is the answer not in the manual?
General| Response Time | < 1 s |
|---|---|
| Protection Rating | IP65 |
| Cable Length | 2 m |
| Output Type | Relay |
| Detection Method | Conductive |
Outlines risks and consequences from not following manual instructions.
Information on using the sensor in potentially explosive atmospheres.
Key safety guidelines for sensor installation.
Procedure for installing a KSB Leakage Sensor supplied separately.
Procedure for installing a KSB Leakage Sensor already mounted on the pump.
Wiring details for the standard KSB Leakage Sensor model.
Electrical connection for sensors in potentially explosive atmospheres.
Connecting power supply and message signals to the analysing unit.
Setting warning and alarm levels using DIP switches.
Steps to perform a functional test after installation.
Safety precautions for maintenance and inspection procedures.
General procedure for dismantling and reassembling the sensor.
To Next Page