Contents
3 of 34
KSB Leakage Sensor
Contents
1 General.................................................................................................................................................... 5
1.1 Principles ...........................................................................................................................................................5
1.2 Target group.....................................................................................................................................................5
1.3 Other applicable documents............................................................................................................................5
1.4 Symbols .............................................................................................................................................................5
1.5 Key to safety symbols/markings.......................................................................................................................5
2 Safety...................................................................................................................................................... 7
2.1 General..............................................................................................................................................................7
2.2 Intended use .....................................................................................................................................................7
2.3 Personnel qualification and personnel training.............................................................................................7
2.4 Consequences and risks caused by non-compliance with this manual .........................................................7
2.5 Safety awareness ..............................................................................................................................................8
2.6 Software changes .............................................................................................................................................8
2.7 Explosion protection ........................................................................................................................................8
3 Transport/Storage/Disposal .................................................................................................................. 9
3.1 Checking the condition upon delivery............................................................................................................9
3.2 Transport...........................................................................................................................................................9
3.3 Storage..............................................................................................................................................................9
3.4 Disposal ...........................................................................................................................................................10
4 Description............................................................................................................................................ 11
4.1 General description ........................................................................................................................................11
4.2 Name plate......................................................................................................................................................11
4.3 Operating limits..............................................................................................................................................11
4.4 Fluids handled.................................................................................................................................................12
5 Installation at site ................................................................................................................................ 15
5.1 Safety regulations...........................................................................................................................................15
5.2 Checks to be carried out prior to installation...............................................................................................15
5.3 Installing the sensor .......................................................................................................................................15
5.3.1 Installing a KSB Leakage Sensor that has been supplied but not fitted ........................................16
5.3.2 Installing a pre-mounted KSB Leakage Sensor ................................................................................16
5.4 Electrical connection ......................................................................................................................................17
5.4.1 Standard design .................................................................................................................................17
5.4.2 Variant for use in potentially explosive atmospheres .....................................................................18
5.4.3 Connecting the power supply and message signals ........................................................................18
5.4.4 DIP switch configuration ...................................................................................................................19
5.5 Display functions during operation...............................................................................................................20
5.5.1 Display ................................................................................................................................................20
5.5.2 Analog output....................................................................................................................................20
6 Commissioning/ Start-up.................................................................................................................... 22
6.1 Carrying out a functional test........................................................................................................................22
6.2 Measures to be taken for shutdown.............................................................................................................23
7 Servicing/Maintenance........................................................................................................................ 24
7.1 Safety regulations...........................................................................................................................................24
7.2 Maintenance/inspection.................................................................................................................................24
7.2.1 Cleaning the drop capillary ...............................................................................................................24
7.3 Dismantling and reassembly..........................................................................................................................25
7.3.1 Dismantling and reassembling the KSB Leakage Sensor.................................................................25
7.3.2 Rotating the upper half of the sensor housing ...............................................................................25
7.3.3 Removing and re-mounting the inductive sensor ...........................................................................25
7.3.4 Resetting the analysing unit .............................................................................................................26
To Next Page
Loading...