KSB Omega Series User Manual

Omega
27
8.2.4 Mechanical Seal –“Type H75N“
(Shaft unit dw = 90 mm)
General instructions concerning assembly/installation, com-
missioning, maintenance, faults and repair have already been
given in sections 8.2.1 and 8.2.2.
(See Operating manual from Type BURGMANN )
S operating manual for seal type H75N).

KSB Omega Series Specifications

General

Type	Centrifugal Pump
Series	Omega
Operating Pressure	Up to 16 bar
Application	Water supply, irrigation
Impeller Type	Closed impeller
Casing Material	Cast iron, Stainless steel
Material	Cast iron, Bronze, Stainless steel