Omega
41
13 Appendix
Contents Page...................................................................................
Types of installation 42.......................................................................
Type of Installation 3E -- Motor Height Adjustment 43.............................................
- Type of Installation 3E -- Motor Height Adjustment -- Baseplate with adjusting screw and pedestal 43
- Type of Installation 3E -- Motor Height Adjustment -- Baseframe with Base / Shims under the Motor Feet 44
- Sealing / flushing water piping 45
- Arrangement of sealing water and flush pipe 45
Sealing water pipe for gland packing 46..........................................................
Sealing water pipe for mechanical seal 46........................................................
Coupling (N--EUPEX) 47........................................................................
- Correlation between tightening torques, dimension P and clearance S1 49
- Trouble--shooting 50
General drawing of pump with parts list Shaft seal: Gland packing 52............................
General drawing of pump with parts list Shaft seal: Mechanical seal 54............................
Mechanical seals, standard design 56............................................................
Shaft seal -- mechanical seals -- Type Crane 58U and 58B 58.......................................
Dimension table Omega 80 -- 210 up to 150 -- 605 60............................................
Dimension tables Omega 200 -- 320 up to 350 -- 510 62..........................................
General arrangement drawing Omega 80 -- 210 up to 100 -- 375 64................................
General arrangement drawing Omega 250 -- 480 up to 250 -- 600; 300 -- 435 and 350 -- 360 70...
General arrangement drawing Omega 300 -- 560 up to 300 -- 700; 350 -- 430 and 350 -- 510 72.....
Table of Connections and Measuring Points 74...................................................
To Next Page
Loading...
Need help?
General
