Need help?Do you have a question about the KSB Omega and is the answer not in the manual?
General| Application | Water supply, irrigation |
|---|---|
| Operating pressure | Up to 16 bar |
| Speed | 2900 rpm, 1450 rpm |
| Connection Size | DN 32 to DN 400 |
| Housing Material | Cast iron, stainless steel |
| Impeller Material | Bronze, stainless steel, cast iron |
| Seal Type | Mechanical seal |
| Operating Temperature | -10°C to +120°C |
Defines safety symbols and signal words.
General safety instructions for operation and maintenance.
Specifies proper operating conditions and limitations.
Requirements for personnel handling the equipment.
Safety guidelines for equipment operators.
Safety guidelines for maintenance and installation.
Safety measures for potentially explosive atmospheres.
Safe transport methods and precautions.
Describes how the pump is configured and operates.
Safety precautions for assembly and installation work.
Steps for installing the pump set.
Instructions for connecting piping to the pump.
Procedures for aligning pump and motor.
Electrical connection guidelines.
Prerequisites and steps for commissioning the pump set.
Steps for priming and venting the pump.
Detailed steps for starting the pump.
Defines permissible operating parameters.
Safety precautions for maintenance work.
Procedures for servicing and inspecting the pump.
Steps for safely dismantling the pump.
Safety rules for dismantling.
General guidelines for reassembling the pump.
Safety rules for reassembly.
To Next Page
