Installat i o n
▪ The can is installed in a pit below the mounting surface.
▪ The pump is connected to the structure by means of the sole plate.
Bearings
▪ Radial bearing
– Product-lubricated radial plain bearing in the pump
▪ Thrust bearing
–
Rolling element bearing, cooled, oil bath lubrication above the shaft seal
Shaft sea l
▪ Single or double mechanical seal
Flanges
▪ Mating dimensions to ASME
4 Description of the Pump (Set)
20 of 78
WKTR
To Next Page
