5 Installation at Site
5.1 Safety regulations
The operator ensures that all maintenance, inspection and installation work is
performed by authorised, qualified specialist personnel who are thoroughly familiar
with the manual.
For all work involving assembly, reassembly and installation, observe the following
safety information:
DANGER
Improper installation in potentially explosive atmospheres
Explosion hazard!
Damage to the pump set!
▷ Comply with the applicable local explosion protection regulations.
▷ Observe the information in the data sheet and on the name plates of pump and
motor.
DANGER
Operation of the pump in combination with an impermissible component, especially can
or base frame
Danger to life!
▷ The pump must only be operated with matching components selected by KSB,
especially can and base frame.
DANGER
Work on the pump set carried out at great heights
Risk of personal injury from falling down!
▷ Provide suitable safety measures, e.g. scaffolding, barriers.
▷ Wear suitable protective clothing.
▷ Comply with all relevant safety regulations.
DANGER
Improper transport
Risk of injury from lifting heavy components!
▷ Select lifting accessories which are suitable for the component weight.
▷ Always use the attachment points provided for the lifting accessories.
▷ Comply with the applicable health and safety regulations.
DANGER
Pump in a vertical position tipping over
Danger to life from pump or components tipping over!
▷ Attach the components to be installed to the hoisting tackle and keep them
secured until the screwed connections have been fastened.
▷ Always install the pump (set) in the sequence described.
▷ Always place components in their centre of gravity position on a suitable
surface to prevent them from tipping over.
5 Installation at Site
24 of 78
WKTR
To Next Page
