KTM 1290 SUPER DUKE R 2023 User Manual

SETUP 2
5
S04915-01
– Unpack and mount the KTM PowerParts levers included in
the delivery.
Guideline
Screw, hand brake
lever
5 Nm (3.7 lbf ft)
Screw, clutch lever 5 Nm (3.7 lbf ft)
S04772-11
– Install the break lever protection.
Info
Observe the KTM PowerParts instructions.
– Check the throttle grip for smooth operation.
S04120-01
– Mount and tighten the rear mirror on both sides.
S04122-01
(SUPER DUKE R)
– Remove the passenger seat. ( p. 8)
– Secure tool set with the rubber strap.

KTM 1290 SUPER DUKE R 2023 Specifications

General

Engine Type	2-cylinder, 4-stroke, V 75°
Displacement	1301 cc
Transmission	6-speed
Cooling	Liquid-cooled
Fuel Tank Capacity	16 liters
Seat Height	835 mm
Dry Weight	189 kg
Bore x Stroke	108 mm x 71 mm
Compression Ratio	13.5:1
Fuel System	Electronic fuel injection
Final Drive	Chain
Rear Suspension	WP APEX monoshock
Traction Control	MTC (Motorcycle Traction Control)
Wheelbase	1482 mm
Power	132 kW (180 hp)
Torque	140 Nm
Frame	Chromium-Molybdenum steel trellis frame, powder coated
Front Suspension	WP APEX 48
Front Brake	2 x Brembo Stylema Monobloc four-piston calipers, 320 mm discs
Rear Brake	Brembo two-piston caliper, 240 mm disc
ABS	Bosch 9.1 MP (incl. Cornering-ABS and Supermoto mode)
Electronics	Cruise Control