KTM 1290 Super Duke R Setup Instructions

SETUP 2
5
S04119-10
–
Unplug connector
7
.
– Position the combination instrument rack on the handlebar.
–
Mount screw
8
, but do not tighten yet.
– Move the combination instrument into the desired position.
–
Tighten screw
8
.
Guideline
Screw, combination
instrument clamping
M6 2 Nm (1.5 lbf ft)
–
Plug in connector
7
with sleeve.
S04120-01
– Mount and tighten the rear mirror on both sides.
S04121-10
(1290 SUPER DUKE R US)
– Bond the reflectors on the right and left side of the reflec-
tor holder.
–
Mount the reflector holder on license plate holder
9
.
S04122-01
– Remove the passenger seat. ( p. 7)
– Secure tool set with the rubber strap.

KTM 1290 Super Duke R Specifications

General

Displacement	1301 cc
Transmission	6-speed
Seat Height	835 mm
Fuel Tank Capacity	16 liters
Dry Weight	189 kg
Starter	Electric starter
Fuel System	Electronic fuel injection
Traction Control	MTC (Motorcycle Traction Control), lean-angle sensitive
Wheelbase	1482 mm
Front Tire	120/70 ZR 17
Rear Tire	200/55 ZR 17
Engine Type	V-Twin, 4-stroke
Power	180 hp (132 kW) @ 9500 rpm
Torque	140 Nm
Frame	Chromium-Molybdenum steel frame, powder coated
Front Suspension	WP APEX 48
Rear Suspension	WP APEX monoshock
Rear Brake	Brembo two-piston caliper, 240 mm disc
Front Brake	Dual 320 mm discs, Brembo Stylema monobloc calipers
ABS	Bosch 9.1 MP (incl. Cornering-ABS and Supermoto mode)