KTM 200 EXC - 15.11 Changing the Speedometer Battery

15 ELECTRICAL SYSTEM 101
15.11 Changing the speedometer battery
Preparatory work
– Remove the headlight mask with the headlight. ( p. 98)
602746-10
Main work
–
Remove screws

.
– Pull the speedometer upward out of the holder.
602748-10
–
Using a coin, turn protection cap

all the way counterclockwise and remove it.
–
Remove speedometer battery

.
– Insert the new battery with the label facing upward.
Speedometer battery (CR 2430) ( p. 125)
– Check the O-ring of the protection cap for correct seating.
602747-10
–
Position protection cap

and turn all the way clockwise using a coin.
– Press any button on the speedometer.
The speedometer is activated.
– Position the speedometer in the holder.
– Mount and tighten the screws with washers.
Finishing work
– Refit the headlight mask with the headlight. ( p. 98)
– Check the headlight setting. ( p. 100)
– Set kilometers or miles. ( p. 20)
– Set the speedometer functions. ( p. 21)
– Set the clock. ( p. 21)