18 SERVICE WORK ON THE ENGINE 155
401955-10
Main work
–
Remove the oil filler plug
with the O-ring from the clutch cover and fill up with
engine oil.
Engine oil (SAE 15W/50) ( p. 184)
Info
For optimal performance of the engine oil, do not mix different types of engine
oil.
If appropriate, change the engine oil.
– Install and tighten the oil filler plug with the O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result in
unconsciousness and/or death.
– When running the engine, always make sure there is sufficient ventilation,
and do not start or run the engine in an enclosed space without an effective
exhaust extraction system.
– Start the engine and check that it is oil-tight.
Finishing work
– Check the engine oil level. ( p. 151)
To Next Page
Loading...
