EasyManua.ls Logo

KTM 50 SX - Checking the Clutch Setting; Removing the Clutch Cover

KTM 50 SX
91 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15 TUNING THE ENGINE 65
15.8 Checking the clutch setting x
101952-10
Connect special tool 1.
Tachometer (45129075000)
401521-01
Let the front wheel of the vehicle make contact with a fixed object.
Danger
Danger of poisoningExhaust gases are toxic and inhaling them may result
in unconsciousness and/or death.
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without an
effective exhaust extraction system.
Start the motorcycle.
Only ride full throttle to the point where the maximum engine speed is reached.
Guideline
3 s
Read the speed.
Slip speed 8,700… 9,300 rpm
» If the specified value is not reached:
Adjust the clutch. x ( p. 66)
15.9 Removing the clutch cover x
Warning
Environmental hazardImproper handling of fuel is a danger to the environment.
Do not allow fuel to get into the ground water, the ground, or the sewage system.
Info
Fuel can emerge via the carburetor.
Capture emerging fuel using a suitable container.
Turn the knurled screw on the fuel tap all the way clockwise.
101953-01
Lay the vehicle down on its left side as shown.

Table of Contents