EasyManua.ls Logo

KTM 50 SX - 16 Service Work on the Engine; Checking Oil Level (50 SX Mini); Bleeding the Oil Pump (50 SX Mini)

KTM 50 SX
91 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16 SERVICE WORK ON THE ENGINE 68
16.1 Checking oil level (50 SX Mini)
Preparatory work
– Stand the motorcycle upright on a horizontal surface.
101954-10
Main work
– Check the oil level in the oil tank.
For a full fuel tank, the oil tank must be filled up to MIN mark A at a minimum.
» If the oil level does not meet specifications:
– Fill up with oil. ( p. 20)
16.2 Bleeding the oil pump x (50 SX Mini)
Condition
The fuel tank has been removed.
300650-10
– Pull off oil line 1.
300652-10
– Fill the oil line with a syringe.
2-stroke engine oil ( p. 81)
300650-10
– Connect oil line 1.
300651-10
– Remove screws 2.
– Take off the oil pump.
– Pull off oil line 3 from the carburetor.

Table of Contents