To Next Page

To Previous Page

22 TECHNICAL DATA 163

22.8 Shock absorber

Shock absorber part number 01.18.7L.19

Shock absorber WP Suspension 4618 with Pro‑Lever linkage

Spring preload

Standard 4 clicks

Static sag 20 mm (0.79 in)

Riding sag 45 mm (1.77 in)

Fitted length 364 mm (14.33 in)

22.9 Chassis tightening torques

Screw, combination instrument EJOT 1 Nm (0.7 lbf ft) –

Screw, headlight EJOT 2 Nm (1.5 lbf ft) –

Screw, headlight mask EJOT 1 Nm (0.7 lbf ft) –

Screw, side stand switch M4 2 Nm (1.5 lbf ft)

Loctite

243™

Remaining screws, chassis M5 5 Nm (3.7 lbf ft) –

Retaining clamp, brake line M5 3 Nm (2.2 lbf ft) –

Screw, air filter box M5 3 Nm (2.2 lbf ft) –

Screw, cable on starter motor M5 3 Nm (2.2 lbf ft) –

Screw, foot brake lever stub M5 6 Nm (4.4 lbf ft)

Loctite

243™

Screw, fuel level sensor M5 3 Nm (2.2 lbf ft) –

Screw, fuel pump M5 4 Nm (3 lbf ft) –

Screw, heat guard M5 5 Nm (3.7 lbf ft)

Loctite

243™

Screw, light switch mount and emer-

gency OFF switch

M5 3.5 Nm (2.58 lbf ft) –

KTM 690 Duke USA User Manual

Questions and Answers: