KTM Freeride E-XC User Manual

15 ELECTRICAL SYSTEM 92
15.6 Refitting the headlight mask with the headlight(Freeride E‑XC)
C00812-11
Main work
–
Connect plug-in connectors of turn signals

, head light

, and ignition
lock

.
C00851-10
–
Position the headlight mask and fix it with rubber straps

.
The holding lugs engage.
–
Position the brake line and wiring harness

.
Finishing work
– Install the KTM PowerPack. ( p. 96)
– Lock the seat. ( p. 63)
– Check the headlight setting. ( p. 94)
15.7 Changing the headlight bulb(Freeride E‑XC)
Note
Damage to reflector Reduced brightness.
– Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
Preparatory work
– Deactivate the vehicle. ( p. 37)
– Fold the seat up. ( p. 63)
– Remove the KTM PowerPack. ( p. 96)
– Mount the covering cap. ( p. 64)
– Remove the headlight mask with the headlight. ( p. 91)
C00813-10
Main work
–
Turn rubber cap

together with the underlying bulb socket counterclockwise all
the way and remove it.
–
Pull bulb socket

of the parking light out of the reflector.

KTM Freeride E-XC Specifications

General

Battery Capacity	3.9 kWh
Power Output	18 kW (24 hp)
Torque	42 Nm
Rear Suspension	WP XPLOR PDS shock absorber
Seat Height	910 mm
Weight	111 kg
Ground Clearance	340 mm
Suspension Front Travel	250 mm
Suspension Rear Travel	260 mm
Motor Type	Permanent magnet synchronous motor
Charging Time 80%	75 minutes
Charging Time 100%	Approx. 110 min
Front Suspension	WP XPLOR 43
Top Speed	80 km/h
Tire Front	80/100-21
Front Brake	260 mm disc, 2-piston floating caliper