15 WHEELS, TIRES
160
K00718-10
–
Clean the thread of the wheel spindle and screw
3
.
– Clean and grease wheel spindle.
Long-life grease ( p. 249)
– Position the front wheel and insert the wheel spindle.
The brake linings are correctly positioned.
–
Tighten screws
4
.
Guideline
Screw, fork stub M8 15 Nm (11.1 lbf ft)
–
Mount and tighten screw
3
.
Guideline
Screw, front wheel
spindle
M8 26 Nm (19.2 lbf ft)
–
Loosen screws
4
.
–
Position wheel speed sensor
5
in the hole. Mount and
tighten screw
6
.
Guideline
Screw, wheel speed
sensor holder
M6 8 Nm (5.9 lbf ft)
– Position the reflector and fender.
–
Mount and tighten screws
7
.
To Next Page
Loading...
Need help?
General
