ELECTRICAL SYSTEM 16
187
V00615-10
– Position the socket with the high beam bulb in the headlight
housing.
– Turn the socket clockwise.
– Check that the lighting is functioning properly.
Finishing work
– Check the high beam headlight adjustment. ( p. 189)
16.8 Checking the low beam headlight adjustment
400726-10
– Park the vehicle on a horizontal surface in front of a light-
colored wall and make a mark at the height of the center of
the low beam headlight.
–
Make another mark at a distance
B
under the first marking.
Guideline
Distance
B
5 cm (2 in)
–
Position the vehicle upright at distance
A
from the wall and
switch on the low beam.
To Next Page
Loading...
Need help?
General
