14 BRAKE SYSTEM
140
14.1 Anti-lock braking system (ABS)
H01910-10
The ABS module
1
, consisting of a hydraulic unit, an ABS con-
trol unit, and a return pump, is located under the seat. One wheel
speed sensor
2
is located in each case on the front and the rear
wheel.
Warning
Danger of accidents Changes to the vehicle impair the
function of the ABS.
– Only allow the rear wheel to spin with the front brake
applied away from public road traffic if the ABS is
switched off.
–
Do not make any changes to the suspension travel.
– Only use spare parts on the brake system which have
been approved and recommended by KTM.
– Only use tires/wheels approved by KTM with the corre-
sponding speed index.
– Maintain specified tire pressure.
– Ensure that service work and repairs are performed
professionally. (Your authorized KTM workshop will be
glad to help.)
The ABS is a safety system that prevents locking of the wheels
when driving straight ahead without the influence of lateral forces.
To Next Page
Loading...
