What does it mean if combination instrument shows nothing in the display of my KTM Supermoto 690 Motorcycle?
If the combination instrument shows nothing in the display of your KTM Motorcycle, the fuse b1 might be blown. Replace the fuse.
General| Compression Ratio | 12.7:1 |
|---|---|
| Transmission | 6-speed |
| Engine Type | Single cylinder, 4-stroke |
| Power Output | 74 hp (55 kW) @ 8000 rpm |
| Torque | 73.5 Nm @ 6, 500 rpm |
| Starter | Electric |
| Rear Suspension | WP monoshock |
| Front Brake | 320 mm disc, 4-piston caliper |
| Rear Brake | 240 mm disc, single-piston caliper |
| Front Wheel | 17 inch |
| Rear Wheel | 17 inch |
| Seat Height | 890 mm |
| Fuel Tank Capacity | 13.5 l |
| Fuel System | Electronic fuel injection |
| Frame | Chrome-molybdenum trellis frame, powder coated |
Proper maintenance is crucial for operation and wear prevention; poor adjustment can cause damage.
Warranty claims require authorized KTM workshop maintenance and confirmation in the service record.
Use fuels, oils, and greases according to specifications listed in the owner's manual.
Illustrates and labels key components of the motorcycle from the front left side.
Illustrates and labels key components of the motorcycle from the rear right side.
Details the location of the chassis number on the steering head and the type label.
Explains where to find the key number on the KEYCODECARD for ordering spare keys.
Shows the location of the engine number stamped on the left side of the engine.
Indicates where the fork part number is stamped on the inner side of the fork stub.
Details the location of the shock absorber part number on the top of the shock absorber.
Describes the clutch lever on the left handlebar, its operation and adjustment.
Locates the hand brake lever on the right handlebar and its function for the front wheel brake.
Explains the operation of the light switch for low and high beam functions.
Explains the ignition/steering lock positions: off, on, and steering locked.
Details the emergency OFF switch for stopping the engine and ignition circuit.
Locates the electric starter button and its operation for starting the engine.
Overview of the combination instrument, its areas and functions.
Explains the function of MODE and SET buttons for display modes and trip reset.
Describes the tachometer display for engine speed and the red marking for excess speed range.
Explains the meaning of various indicator lamps (flasher, neutral, warning lamps).
Explains the speed display in km/h or mph.
Guides on how to change the unit between kilometers and miles for ODO value.
Provides steps to set the clock on the combination instrument.
Details the tripmaster TRIP1 operation and how to reset it to 0.0.
Explains the tripmaster TRIP2 operation and how to reset it to 0.0.
Explains the coolant temperature indicator using bars and warning lamp status.
Provides instructions on how to open the fuel filler cap using the ignition key.
Details the procedure for closing the fuel filler cap using the ignition key.
Locates fuel taps under the tank and explains their states: closed and open.
Explains how to lock the seat using the ignition key.
Locates the tool set in the storage compartment under the seat.
Shows the location of the shift lever on the engine and illustrates gear positions.
Locates the foot brake pedal and its function for the rear brake.
Explains the side stand and its coupling with the safety electric starter system.
Provides warnings and advice for initial operation, including safety and riding practices.
Details the running-in phase, specifying maximum engine speed limits for different mileage intervals.
Offers warnings and guidelines for loading the vehicle, including weight limits and handling.
Lists essential checks to perform on the motorcycle before riding for safety and proper function.
Provides crucial safety warnings about exhaust gases and battery usage during starting.
Guides on engaging the clutch, first gear, and throttle for initial vehicle movement.
Offers advice on gear shifting, riding techniques, and safety precautions while riding.
Provides safety instructions for stopping the vehicle, parking, and securing it.
Details safety precautions and procedures for refueling, including fire and poisoning hazards.
Provides instructions and safety notes for safely lifting the front of the motorcycle.
Details the procedure and safety precautions for lifting the rear of the motorcycle.
Instructions for safely removing the motorcycle from the rear work stand.
Overview of fork and shock absorber adjustment options for adapting chassis to riding style and payload.
Guides on adjusting the fork's compression damping for improved suspension behavior.
Explains how to adjust the fork's rebound damping for optimal suspension response.
Details shock absorber compression damping, low- and high-speed adjustment.
Provides instructions for adjusting the low-speed compression damping of the rear shock absorber.
Guides on adjusting the high-speed compression damping of the rear shock absorber.
Explains how to adjust the rebound damping of the shock absorber for ride comfort.
Details the procedure for bleeding the fork legs to release excess pressure.
Provides steps and precautions for cleaning the motorcycle chain effectively and safely.
Explains the importance and method of checking the chain tension to prevent damage.
Guides on adjusting the chain tension correctly to ensure proper power transmission and safety.
Details how to check the rear and engine sprockets for wear and when to replace them.
Provides a method to measure chain wear and determine if replacement is needed.
Explains how to check brake disc thickness and wear limits for safe braking.
Guides on adjusting the handbrake lever for optimal reach and comfort.
Details how to check the front brake fluid level and warnings about low levels.
Provides instructions for topping up the front brake fluid, with safety warnings.
Discusses brake linings, their testing, and the risks of using non-approved parts.
Explains how to check the front brake linings for wear and the consequences of not replacing them.
Details how to check and adjust the free play of the foot brake lever for proper function.
Guides on checking the rear brake fluid level and warnings about low fluid.
Explains how to check the rear brake linings for wear and the consequences of not replacing them.
Provides step-by-step instructions for safely removing the front wheel of the motorcycle.
Details the procedure for correctly installing the front wheel onto the motorcycle.
Provides instructions for safely removing the rear wheel of the motorcycle.
Details the procedure for correctly installing the rear wheel onto the motorcycle.
Explains how to check rear hub rubber dampers for wear and damage.
Guides on inspecting tire condition, including cuts, damage, and tread depth.
Details how to check spoke tension for wheel balance and integrity.
Provides instructions for removing the motorcycle seat using the ignition key.
Details the procedure for correctly reattaching the motorcycle seat.
Guides on how to correctly reinstall the fuel tank after maintenance or inspection.
Details the final steps for positioning the fuel tank and securing it.
Provides step-by-step instructions and safety warnings for removing the motorcycle battery.
Details the procedure for correctly installing the motorcycle battery with safety precautions.
Guides on how to safely recharge the motorcycle battery and environmental considerations.
Provides instructions for changing the main fuse and warnings about electrical system overload.
Details how to change fuses for various power consumers and identifies fuse box location.
Guides on how to remove the headlight mask and headlight assembly.
Provides instructions for replacing the headlight bulb, including safety notes.
Details the procedure for replacing the parking light bulb.
Provides instructions for replacing the motorcycle's flasher bulbs.
Guides on how to check the motorcycle's headlight aim against a wall.
Provides instructions for adjusting the headlight beam range for optimal visibility.
Explains the cooling system's operation, including water pump, radiator cap, and compensating tank.
Details how to check coolant antifreeze concentration and fluid level in the compensating tank.
Provides instructions for safely draining the motorcycle's cooling system.
Details the procedure for filling and bleeding the cooling system to ensure proper circulation.
Guides on adjusting the clutch lever position for rider comfort and control.
Explains how to check and correct the hydraulic clutch fluid level.
Details how to check and measure the play in the gas (throttle) Bowden cable.
Provides instructions for adjusting the play in the gas Bowden cable for proper throttle response.
Guides on adjusting the handlebar angle for optimal riding position and comfort.
Details how to check the engine oil level when the engine is at operating temperature.
Provides instructions for safely draining the engine oil from the motorcycle.
Details the procedure for removing the motorcycle's oil filter.
Guides on correctly installing the new oil filter and its cover.
Provides instructions for cleaning the oil screens to ensure proper oil flow.
Details the procedure for filling the engine with the correct type and amount of oil.
Guides on how to top up the engine oil level if it is below the specified mark.
Provides instructions and precautions for cleaning the motorcycle safely and effectively.
Offers guidance on preparing the motorcycle for winter storage to prevent damage.
Provides actions to take before storing the motorcycle for a longer period.
Details the steps required to safely put the motorcycle back into operation after storage.
Specifies the required fuel type for the motorcycle according to DIN EN 228 standards.
Specifies the recommended brake fluid type and supplier, advising compliance with standards.
Specifies the required hydraulic fluid type and supplier for the clutch system.
Details the required engine oil type, viscosity, and standards for motorcycle lubrication.
Specifies the recommended fork oil type and viscosity for the front suspension.
Recommends specific chain cleaner products for motorcycle maintenance.
Recommends specific motorcycle cleaner products for washing the vehicle.
Recommends specific contact spray for electrical contacts to prevent issues.
Explains the JASO T903 MA standard for 4-stroke motorcycle engine oils.
Describes SAE viscosity classes for oils and their meaning.
To Next Page