5 Commissioning and Operation Kübler Group
34 - EN HB Profibus Interface - R67068.0002 - 01
a) Disconnect the master / slave connection and change the station address to 0x0A (10
decimal).
b) Write the configuration in the control.
ð Mater / slave connection with new station address 10. The device is now recognized under
station address 10.
5.5.2 Performing a Preset
ü This example sets preset 100 decimal, which is subsequently performed.
a) Enter preset value 0x64 in the output word.
To Next Page
Loading...