PTO16
A Tractor engine will not start if PTO clutch control lever
is in the engaged "ON" position.
A If the PTO system is engaged and you stand up from
the seat, the warning buzzer will whistle for about 10
seconds after standing up.
This is because the tractor is equipped with "Operator
Presence Control System".
C PTO Clutch Indicator
The PTO clutch indicator turns on while PTO clutch
control lever is in "ON" (Engage) position.
BPTO Clutch Control Switch
[With Dual Speed model]
The PTO clutch control switch engages or disengages the
PTO clutch which gives the PTO independent control.
Turn the switch to "ON" to engage the PTO clutch. Turn
the switch to "OFF" to disengage the PTO clutch.
C PTO Clutch Control Switch
To turn ON
While pushing the switch, turn clockwise to the " "
position and release your hand. (In the ON position,
switch slightly rises itself.)
Tractor model
(A) 540 (B) 540E
PTO / Engine speed rpm
M6040
M7040
540 / 2160 540 / 1825
M8540
M9540
540 / 2035 540 / 1519
(1) PTO clutch indicator
(1) PTO clutch control switch "ON" "OFF"
To Next Page
Loading...
