Kubota WSM 05-E3B Series User Manual

S-10
05-E3B, 05-E3BG, WSM
DIESEL ENGINE
ENGINE BODY (Continued)
W10585750
LUBRICATING SYSTEM
W11368400
Item Factory Specification Allowable Limit
Crankshaft Side Clearance 0.15 to 0.31 mm
0.0059 to 0.012 in.
0.50 mm
0.020 in.
Cylinder Liner I.D. D1005-E3B / E3BG
D1105-E3B / E3BG
D1105-T-E3B
D1305-E3B / E3BG
V1505-E3B / E3BG
V1505-T-E3B
76.000 to 76.019 mm
2.9922 to 2.9928 in.
78.000 to 78.019 mm
3.0709 to 3.0716 in.
76.15 mm
2.998 in.
78.15 mm
3.077 in.
Cylinder (Oversized) D1005-E3B / E3BG
D1105-E3B / E3BG
D1105-T-E3B
D1305-E3B / E3BG
V1505-E3B / E3BG
V1505-T-E3B
76.500 to 76.519 mm
3.0119 to 3.0125 in.
78.500 to 78.519 mm
3.0906 to 3.0912 in.
76.65 mm
3.018 in.
78.65 mm
3.096 in.
Engine Oil Pressure At Idle Speed
At Rated Speed
–
197 to 441 kPa
2.00 to 4.50 kgf/cm
2
28.5 to 64.0 psi
49 kPa
0.50 kgf/cm
2
7.1 psi
147 kPa
1.50 kgf/cm
2
21.3 psi
Inner Rotor to Outer Rotor Clearance 0.060 to 0.18 mm
0.0024 to 0.0071 in.
–
Outer Rotor to Pump Body Clearance 0.100 to 0.180 mm
0.00394 to 0.00708 in.
–
Inner Rotor to Cover Clearance 0.025 to 0.075 mm
0.00099 to 0.0029 in.
–
KiSC issued 12, 2007 A

Kubota WSM 05-E3B Series Specifications

General

Brand	Kubota
Model	WSM 05-E3B Series
Category	Engine
Language	English