KUHN FC352RG - Component Maintenance and Replacement

Maintenance and storage
Mower conditioner
FC302RG - FC352RG
61
KN271BGB C
2. Lubrication
Except for the secondary PTO shaft lubrication, the
machine must be placed in transport position for all
maintenance operations (knife replacement, lubrication,
etc).
- Clean grease nipples before greasing.
 PTO shaft
Primary PTO shaft
- Every 8 hours:
• universal joints (1).
- Every 20 hours:
• transmission tube (2).
- Every 40 hours:
• Guide rings (3).
Intermediate PTO shaft 1
- Every 8 hours:
• universal joints (1).
Lubricate with multi-purpose grease grade
NLGI 2
11
3
3
2
1
1