KUHN FC352RG - Instructions for Transport; Putting the Machine into Transport Position

Instructions for transport
Mower conditioner
FC302RG - FC352RG
39
KN271BGB C
$Instructions for transport
1. Putting the machine into transport
position
From the working position:
- Operate drawbar shift cylinder to put the drawbar in
transport position.
- Shut-off drawbar shift cylinder lock valve (1).
- Fit safety bar (2).
- Reinstall R-clip (3).
- Activate mowing unit lift cylinders to fully raise the
machine.
- Shut-off mowing unit lift cylinder lock valves (1).
Before placing the machine into transport
position:
- Wait until the rotating parts have come
to a complete stop.
- Check that nobody is within the machine
pivoting area.
- If there is someone, make sure the
person moves away.
1
3
2
1
1