Mower conditioner
38
FC302RG - FC352RG
Putting into service
KN271BGB C
Uncoupling the machine
- Lower and lock parking stand (1).
- Lower the tractor three-point linkage to rest the
machine on the ground.
- Block machine with wheel chocks (1).
- Uncouple the PTO shaft.
- Disconnect and store hydraulic hoses on holder (1).
- Disconnect and store 7-pin plug in its holder (2).
- Release the lower links.
- Lower the tractor three-point linkage.
The machine is uncoupled.
Park the machine on an even fairly level
ground.
Preferably park the machine in transport
position, with the mowing unit resting on the
ground.
To Next Page
Loading...
