HRB202-202S-252D-302D
80
9. - Optional equipment
KN136JGB_D
Power harrow
- When optional equipment is used, follow
specific procedures mentioned in the
related section:
• Optional equipment / Hydraulic lift
linkage / Optional equipment / Hydraulic
lift linkage stroke limiters.
- Activate the single acting valve that controls the lift
cylinders of the hydraulic lift linkage.
- Attach one side of safety chain (1) to the power
harrow headstock (2) and the other end to the
hydraulic lift linkage frame (3).
- Insert and lock pins using R-clips.
- Tighten chain.
- The transport position is obtained by raising the
tractor's three-point linkage.
The machine is in transport position.
- Never engage the tractor PTO drive when
the machine is in transport position.
To Next Page
