KUHN HRB202 - Safety

9. - Optional equipment
HRB202-202S-252D-302D
97
KN136JGB_D
Power harrow
 Working depth adjustment
- Adjust the track eradicator working depth using pin
(2).
The working depth of the track eradicators must
not exceed 100 mm (4’’).
- Adjust both sides to the same setting.
9.6.3 Safety
The track eradicators are fitted with an overload
mechanism should they encounter an obstacle:
• With traction bolt overload mechanism: Bolt
breaks.
• With spring overload mechanism: The track
eradicator automatically resets to its work
position after having cleared the obstacle.
Track eradicators with the spring overload
mechanism are recommended for work in
difficult or stony grounds.
2