MIXER
T
RANSPOSE
HARMONY
D
S
P
The DSP simulates sounds in real environment. With the DSP effect,
you can add ambiance and depth to your performance in a variety of
ways. The DSP effect is set to ON and the icon on the LCD is lighten
when keyboard is power on.
Holding down [SHIFT] button and then press the [DSP] button to turn
the DSP effect on or off. Refer to Function Menu for the effect types
and the adjustable levels.
Note:
It may cause a break or a noise if you switch on/off the DSP when style
and song is playing. This is normal and need not panic.
The Mixer allows you to adjust separately the volume of different
tracks.
1. Press the [MIXER] button to enter the mixer function menu, the
LCD
displays the current mixer track.
2. Repeatedly press the [MIXER] button to select the track you want.
Then use [+/YES]/ [-/NO] button or data dial to change parameters.
Note:
It will exit the mixer menu if there is no operation in 5 seconds.
DSP
Mixer
21
Content
Adjust the Percussion track volume.
Adjust the Rhythm track volume.
Adjust the Bass track volume.
Adjust the Chord 1 track volume.
Adjust the Chord 2 track volume.
Adjust the Chord 3 track volume.
Adjust the Phrase 1 track volume.
Adjust the Phrase 2 track volume.
Adjust the Upper 1 track volume.
Adjust the Upper 2 track volume.
Adjust the Lower track volume.
LCD Display
XXX Rhythm_s
XXX Rhythm_m
XXX Bass
XXX Chord1
XXX Chord2
XXX Chord3
XXX Phrase1
XXX Phrase2
XXX Upper 1
XXX Upper 2
XXX Lower
Range
0 - 127
0 - 127
0 - 127
0 - 127
0 - 127
0 - 127
0 - 127
0 - 127
0 - 127
0 - 127
0 - 127
SHIFT
To Next Page
Loading...
Need help?
General
Weight and Dimensions
