BANK
R
ECORD
With the easy-to-use song recording features, you can record your own
keyboard performances as a user song. Each user songs can be
recorded with 6 tracks (1 ACCOMP track, 5 MELODY tracks) each.
Start Recording
Before you start recording, you need to select a user song to which the
recording song will be saved.
1. Holding down [SHIFT] button and then press the [RECORD] button to
enter user song selection mode. The LCD displays “RecSng01” and
sequence number.
Use the data dial, [+/YES] or [-/NO] button select the user song you
want.
2. Holding down [SHIFT] button and then press the [RECORD] button
again to enter recording standby mode. “REC” appears on LCD and
the beats start flashing. The instrument will automatically select an
empty track to record your performance.
The select track indicator will flash on the left of LCD.
3. In the recording standby mode, you can adjust parameters such as
the voice, style and tempo. When recording a new song, it will
automatically select “Melody 1” as the recorded track.
Holding down [SHIFT] button and then press “ACCOMP” (or
“MELODY1” to “MELODY 5”) to select a desired track.
The ACCOMP track and one of MELODY track can be recorded at
the same time, but it cannot record two MOLODY track
simultaneously.
4. Press [START/STOP] button or play the keyboard to start recording.
If you have selected the ACCOMP track, and have turned on the
A.B.C. function, recording will start as soon as you play a chord in the
left hand area.
Select a Track
Track indicators on LCD usually show one of three states: Blinking, Light
on, Light off.
Blinking: It means the track is chosen for recording. If the track has
recorded data, the original data will be replaced.
Light on: the track has data and will play back the data during recording.
Light off: the track either has no data or is under recording and cannot
play back.
In recording standby mode, you can press the track buttons repeatedly
to shift between different states.
Note:
1. Record style with accompaniment track, and record melody with
melody track.
2. In recording standby mode, it will automatically select the empty track
next to the occupied track. For example, if “Melody 1” is occupied,
then “Melody 2” will be selected as the record track. When all 6 tracks
have been recorded, select the “melody 1” track to save recordings.
Record
29
SHIFT
BANK
R
ECORD
SHIFT
ACCOMP
To Next Page
Loading...
Need help?
General
Weight and Dimensions
