In addition to the 64 voices built in, the Mark-Pro TWOi also lets you combine two of the 64
voices to make unique sounds of your own. It is called layering, and you can do this using
the Layer button.
Adding a voice other than strings
Press the Layer button. The LED on the button turns on and the strings voice will be added
onto the main voice.
Press the Layer button once more to turn the second voice off.
You can only add one layer to the main voice. Pressing the Layer
button will add the strings voice by default to any selected main
voice. But you can change the added voice using the above method.
Layer
Layer
Piano E.Piano Organ/Key String Pad/Voice
Brass
Guitar
Perc.
Grand Piano 1 2 3 4 5 6 7 8
If you want to add a voice other than strings, press the Layer button to light up
the LED on it and choose a voice with the voice select buttons. Choose an
instrumental category with the upper row buttons and choose the sub voice with
the lower row buttons.
The display will show you the number of the added voice. (See page 50 for the list
of voices in numbers.)
The second voice can be turned off by pressing the Layer button once more.
~
Adding strings voice
To Next Page
Loading...
