Global
Loop
You can play the demo songs in one of the following three modes:
1) repeating one song; 2) repeating all songs; 3) no repeat.
The Mark-Pro TWOi will play one selected demo song without repeat
by default, but you may change the play mode with the Loop
function.
Press the Global button then press the Loop button. The display
will show you one, all, or off.
Pressing -/No or +/Yes will change the play mode.
Returns the Mark-Pro TWOi to the initial state from the factory.
Press the Global button then press the Reset button. rSt will
appear on the display, meaning reset.
Press the +/Yes button and the display will ask you Su? (meaning
are you sure?). Press the +/Yes button. The display will once again
ask you rL? (meaning really?). Press the +/Yes button again to give
the final confirmation.
Another way of reset is to hold down the Global button and press
the C8 key on the keyboard. It is an easier and quicker way of reset
since it skips an extra step of entering the global menu.
/ No
/ Yes
+
-
Global
Reset
~ ~
~ ~
Global
Loop
Reset
/ No
/ Yes
+
-
All recorded and modified data will be discarded
and the memory will be initialized.
Execute reset when Mark-Pro TWOi does not
function properly or after the OS is upgraded.
To Next Page
Loading...
