Tune
Fine tuning adjusts the pitch of the entire keyboard by cents. A
cent is 1/100 division of a half-step, or 1/1200 of an octave.
Press the Global button, then press the Tune button.
The display will show “0”. Press -/No or +/Yes to change the
number down to -50 or up to 50. The number on the display tells
you how many cents you have moved.
Local control off is needed when using an external MIDI device with
your Mark-Pro TWOi such as a computer sequencer. In that case,
your playing goes to the computer instead of the internal sound
engine. The computer has control of the Mark-Pro TWOi. To hear
your playing, the computer should be set to send the MIDI signals
back to the Mark-Pro TWOi(called patchthru).
Local control is always on by default. When you
use the Mark-Pro TWOi independently, you do
not need to change the default local control
setting.
Global
Tune
/ No
/ Yes
+
-
~ ~
To set the tune value back to “0”, press the -/No and
+/Yes buttons at the same time.
To Next Page
Loading...
