Selecting Rhythms
Playing Rhythms
Changing Tempo
Rhythm Volume
The Mark-Pro TWOi has 64 built in rhythm patterns. The first 4 patterns are
metronomes (2/4, 3/4, 4/4, and 6/8) and the other 60 are various rhythms.
Select a rhythm in Rhythm Selection mode. You can always play it by pressing
the Play/Stop button in stop mode.
To select one of the 60 rhythms or 4 metronomes, press the Metro/Rhythm
button. The LED will turn on and you will be in the Rhythm Selection mode.
Look at the display and press -/No or +/Yes until you get to the desired
number.
“r” before numbers stands for rhythm.
Press Metro/Rhythm again to get out of the Rhythm Selection mode.
Select a rhythm (or a metronome) as above and you can start playing the
selected one in two ways:
Exit the selecting mode (the LED on the Metro/Rhythm button should be off).
Press Play/Stop. Press Play/Stop once again to stop the playing.
Or tap the Tap Tempo button 4 times. The selected rhythm will play at the
average tempo of the 4 taps.
To change the tempo of the rhythm while playing, tap the Tap Tempo button
twice at the desired tempo.
To change the volume of the rhythm, hold down the Metro/Rhythm button
and press the -/No or +Yes button.
Metro / Rhythm
/ No
/ Yes
+
-
Metro / Rhythm
To Next Page
Loading...
