You can connect your Mark-Pro TWOi to an MP3 or a CD player via a pair of
stereo RCA audio in jacks on the rear panel, and have them use the Mark-Pro
TWOi’s speakers. Although you can control the volume of the output with the
main volume control knob on the front panel, it is recommended that you
connect a device with its own volume control.
Reverb and effect settings are not effective for the audio in signal from an
external device.
You can connect the pair of stereo RCA audio outs on the rear panel to an
external amplifier and speakers. You can also connect the Mark-Pro TWOi to a
mixer or other audio device to record its sound via this pair of RCA outs.
A headphone jack allows private practice. Plugging in a pair headphones turns
off the speakers.You can also insert a "dummy" stereo headphone adapter to
silence the speakers. This is useful if you want to mute the internal speaker
system while using a more powerful external amplification system connected
to the Audio Out.
The Mark-Pro TWOi has two identical headphone jacks which allow two people
work together on the same Mark-Pro TWOi.
Audio In/Out
Audio In
Audio Out
Headphone Out
Audio In/Out
To Next Page
Loading...
