Adjusting the Volume Balance
To make the left voice louder, while holding down
the Split button, press the +/Yes button. Likewise,
press the -/No button while holding down the Split
button, to make the left voice softer.
Split Point
Split
Layer
Split Point
Layer
/ No
/ Yes
+
-
Pressing the Split button changes the voice of the left side keys on the
keyboard starting from Ab3 key by default. However, you can change the split
point to other than the Ab3 key. Hold down the Split and the Layer buttons at
the same time and press any key on the keyboard to change the split point. The
pressed key and its left side will change to the Bass Guitar sound. If you want a
voice other than the Bass Guitar for the split left, select it from the voice select
area while the LED on the Split button is on.
To Next Page
Loading...
