Volume: CC #7, 39
The Mark-Pro TWOi recognizes Volume messages, which control the overall
volume of the sound on the MIDI channel on which they are sent. Controller 7
can be used by itself, or when subtle control is desired, controller 39 can be
used with it.
Pan: CC #10, 42
The Mark-Pro TWOi recognizes Pan messages, which control the location in
the stereo field of the sound on the MIDI channel on which they are sent.
Controller 10 can be used by itself (avalue of 0 is hard left, 64 is centered,
and 127 is hard right), or when subtle control is desired, controller 42 can be
used with it.
Expression: CC #11, 43
The Mark-Pro TWOi recognizes Expression messages, which also regulate the
volume of the sound on the MIDI channel on which they are sent between a
minimum of 0 and a maximum of the current Volume setting. Controller 11
can be used by itself, or when subtle control is desired, controller 43 can be
used with it.
Sustain, Sostenuto, Soft: CC #64, 66, 67
The right, center, and left pedals transmit MIDI controller message 64
(Sustain), 66 (Sostenuto), and 67 (Soft), respectively. The Mark-Pro TWOi also
recognizes these messages. A value of 0 is OFF, and a value of 127 is ON.
These pedals affect the timbre or modulation of some internal programs
(voices) of the Mark-Pro TWOi.
All Notes Off, Reset All Controllers: CC#120, #121
The Mark-Pro TWOi recognizes the All Notes Off message (CC #120)
which silences the instrument, and the Reset All Controllers message (CC
#121) which resets all controllers to their default values.
MIDI
To Next Page
Loading...
